Ab einen Bestellwert von 240,- EURO berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND / SHIPPING EXCLUSIVELY TO GERMANY
Parts » Abzüge 1 2 3 4 56 Artikel

B-G2S-E The Geissele 2 Stage Enhanced Trigger (B-G2S-E) provides superior control and helps accuracy while maintaining the robustness and reliability that Geissele triggers are known for. The B-G2S-E gives a smooth, light 1st stage take up of 2.3lbs and a crisp, candy-cane-like 2nd stage break of 1.2lbs. The B-G2S-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical. B-GRF (Geissele Rapid Fire) The Geissele Rapid Fire Trigger (B-GRF) was developed to give semiautomatic-only rifles a glass-smooth trigger pull very similar to the Geissele Super Select Fire (SSF) trigger designed for the U.S. Special Operations Community . The B-GRF is a fast-shooting, smooth trigger ideal for 3 Gun competition and recreational shooting alike. It pulls like a single-stage, but resets like a two-stage. Two trigger springs are included so the B-GRF can be set up with a pull of either 4 lbs or 3.2 lbs. Does NOT convert semiautomatic rifles to automatic. Note: The B-GRF trigger has a very short, light pull and reset. It is not recommended for bench rest shooting or shooting small groups. It is designed for CQB-style rapid target engagement and quick follow up shots.

SPECS: Steel, black finish. Fits semi automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease and installation instructions. Black spring is for 3.2lb pull.Gold and Silver colored are for 4lb pull.
 :  
325,00 € (incl. Mwst. zzgl. Versand)
 

B-G2S-E The Geissele 2 Stage Enhanced Trigger (B-G2S-E) provides superior control and helps accuracy while maintaining the robustness and reliability that Geissele triggers are known for. The B-G2S-E gives a smooth, light 1st stage take up of 2.3lbs and a crisp, candy-cane-like 2nd stage break of 1.2lbs. The B-G2S-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical. B-GRF (Geissele Rapid Fire) The Geissele Rapid Fire Trigger (B-GRF) was developed to give semiautomatic-only rifles a glass-smooth trigger pull very similar to the Geissele Super Select Fire (SSF) trigger designed for the U.S. Special Operations Community . The B-GRF is a fast-shooting, smooth trigger ideal for 3 Gun competition and recreational shooting alike. It pulls like a single-stage, but resets like a two-stage. Two trigger springs are included so the B-GRF can be set up with a pull of either 4 lbs or 3.2 lbs. Does NOT convert semiautomatic rifles to automatic. Note: The B-GRF trigger has a very short, light pull and reset. It is not recommended for bench rest shooting or shooting small groups. It is designed for CQB-style rapid target engagement and quick follow up shots.

SPECS: Steel, black finish. Fits semi automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease and installation instructions. Black spring is for 3.2lb pull.Gold and Silver colored are for 4lb pull.
 :  
325,00 € (incl. Mwst. zzgl. Versand)
 

SUPER TRICON TRIGGER- Gives your AR-15 the same high performance and reliability of the SSA trigger with additional upgrades designed for operation in harsh environments. Trigger shoe is curved at the top and then becomes straight, and has pronounced surface texture with raised ribs for positive, non-slip finger contact in wet, muddy, or snowy conditions. Features a 4½ lb. total pull weight with a 2½ lb. first stage, plus a full-power hammer spring to ensure positive ignition. Stainless steel springs withstand rough use and resist corrosion in wet environments. Non-adjustable sear engagement.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease and instructions.
 :  
369,00 € (incl. Mwst. zzgl. Versand)
 

Two-Stage Trigger With Ultra-Fast Lock Time; Adjustable & Pre-Set Models

Super Semi-Automatic (SSA) 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliberate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact surfaces are wire-EDM cut to exact dimensions for precise engagement free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.
 :  
369,00 € (incl. Mwst. zzgl. Versand)
 

Two-Stage Trigger With Ultra-Fast Lock Time; Adjustable & Pre-Set Models

Super Semi-Automatic (SSA) 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliberate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact surfaces are wire-EDM cut to exact dimensions for precise engagement free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.
 :  
369,00 € (incl. Mwst. zzgl. Versand)
 

Tow Stage
Funktion auch beim V22 und 9mm System
Made in Germany!
 :  
195,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany!
 :  
119,00 € (incl. Mwst. zzgl. Versand)
 

Single Stage
Funktion auch beim V22 und 9mm System
Sonderposten!
 :  
75,00 € (incl. Mwst. zzgl. Versand)
 

 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

 :  
12,00 € (incl. Mwst. zzgl. Versand)
 

Replacement military-style Trigger Group for receivers with a .154 diameter small pin. Contains a trigger, hammer, disconnector and selector.




 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

Unterbrecherfeder
Abzugsfeder
Contains one reduced power trigger spring and one disconnector spring Designed to lighten and improve trigger function For use in AR15, M16, M4, & variants
 :  
19,00 € (incl. Mwst. zzgl. Versand)
 

in div. Stärken zu bekommen.
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
 :  
8,00 € (incl. Mwst. zzgl. Versand)
 

in div. Stärken zu bekommen.
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
 :  
9,00 € (incl. Mwst. zzgl. Versand)
 

zum perfekten einstellen vom Abzug...
 :  
24,00 € (incl. Mwst. zzgl. Versand)
 

For Smooth, Light Trigger Pull & Reliable Ignition
Precision-calibrated springs give produce a consistent pull on a stock JP M15 rifle trigger, while preserving ignition reliability with U.S.-manufactured ammunition. JPS3.5T produces 3.5 to 4 lb. trigger pull. Can also be used with properly prepared (instructions included) mil-spec trigger/hammer components to produce a 4- to 5-lb. pull with a smooth “roll off” feel and good control. The JPS4.0 spring kit produces a 4 to 4.5 lb. trigger pull.
SPECS: Spring steel. Kit includes red-coded hammer spring, yellow-coded trigger return spring, and disconnector spring. For use on AR-style .308 rifles; not for defense or duty applications
 :  
26,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Abzüge 1 2 3 4 56 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)