:  

 :  

 :  

für AR15 und AR10 · 2 austauschbare Hammerfedern mit 4,5 lb. (2.040 g) oder 5,5 lb (2.495 g) Abzugsgewicht ·wärmebehandelter, legierter Stahl · kurzer Weg zum Bruch · Single Stage · für Standard Receiver mit Small Pin Lower · High Power Touch Off für höchste Genauigkeit · sauberer Druckpunkt · sehr positiver Reset (spürbar und hörbar)

 :  

Für AR15 · 2 austauschbare Hammerfedern mit 4,5 (2.040 g) oder 5,5 lb (2.495 g) Abzugsgewicht · gebogener Abzugsbügel · Single Stage · sauberer Druckpunkt · kurzer Reset-Weg

 :  

Für AR15 und AR10 · 2 austauschbare Hammerfedern mit 4,5 (ca. 2.040 g) oder 5,5 lb (ca. 2.495 g) Abzugsgewicht · Single Stage · High Power Touch Off für höchste Genauigkeit · sauberer Druckpunkt · sehr positiver Reset (spürbar und hörbar)

 :  

TriggerTech produces a trigger that drastically changes functionality by using a roller. Other trigger designs play with pivots and polishing to try to attain the best break possible. TriggerTech uses patented Frictionless Release Technology™ that distinctly improves feel and accuracy. It uses rolling friction leading to unparalleled performance. Drop-in design for lowers with .154” pins. Single Stage Curved or straight trigger Zero Creep Release provided by Frictionless Release Technology™ Adjustable from 2.5 to 5 lbs with a patent pending design Enhanced Reset Control™ with sub .030” reset Hammer, Sear and Trigger are all Stainless Steel and all other components are corrosion resistant

 :  

TriggerTech produces a trigger that drastically changes functionality by using a roller. Other trigger designs play with pivots and polishing to try to attain the best break possible. TriggerTech uses patented Frictionless Release Technology™ that distinctly improves feel and accuracy. It uses rolling friction leading to unparalleled performance. Drop-in design for lowers with .154” pins. Single Stage Curved or straight trigger Zero Creep Release provided by Frictionless Release Technology™ Adjustable from 2.5 to 5 lbs with a patent pending design Enhanced Reset Control™ with sub .030” reset Hammer, Sear and Trigger are all Stainless Steel and all other components are corrosion resistant

 :  

Restposten!

Drop-in trigger to replace factory original or other low performance trigger. Used and recommended by champions. Yes, this is the famous "Nord Arms Gen 2 Trigger" or "Nord Arms AR15 Match Trigger" you might have heard about. Now NORD ARMS just call it THE trigger.
Single stage trigger with short pre-travel to deliver pleasant rolling break. This trigger is made to last - all parts are made of strong materials, springs are made of stainless steel and are with long lifespan. Hammer weight and spring strength are carefully tested to activate the primers of all different cartridges. Oversize steel trigger pins for maximum 22.5 mm / 0.89" wide lower receiver included. No anti-walk pins needed as the trigger pins will be firmly locked in place.
The Truth About Guns Magazin tested 13 drop-in triggers. THE trigger received very warm welcome. Click here for results.
Pull weight: NA-TR9, Advanced trigger, 1.5 - 1.9 kg / 3.3 - 4.2 lb,
Pin size: .154"
Weight: 76 grams / 2.68 oz (trigger group) + 5 grams / 0.18 oz (pins)

 :  

The CMC 2-Stage trigger easily replaces your AR-15’s gritty, heavy factory trigger and gives you a smooth, consistent, two-stage pull with a crisp, clean break, and a short reset. It’s based on the drop-in trigger module originally designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade trigger without the hand-fitting and trial-and-error. These two-stage CMC triggers come pre-set from the factory with a variety of first ("set") and second ("release") stage pull weights, so you can choose a combination that’s best for your kind of shooting. And you can choose between a traditional Curved trigger shoe or an eye-catching Flat shoe with a different finger-to-trigger feel that some target shooters prefer. As with all CMC triggers, the AR-15 2-stage model has a robust steel housing that retains all the internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is carefully adjusted at the factory for minimal take-up and over-travel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two slightly oversized center pins replace the standard, trigger/hammer pins to prevent trigger wobble, reduce friction, and save wear. Chicago-type screws eliminate pin walk. Single-stage models are also available - see separate listing.
SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Fixed first/second stage pull weights are not user-adjustable. Includes two (2) Chicago-style center pins. Fits AR-15 with .154" diameter trigger and hammer pins. Also works with AR-308s that use AR-15 triggers.

 :  

The CMC 2-Stage trigger easily replaces your AR-15’s gritty, heavy factory trigger and gives you a smooth, consistent, two-stage pull with a crisp, clean break, and a short reset. It’s based on the drop-in trigger module originally designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade trigger without the hand-fitting and trial-and-error. These two-stage CMC triggers come pre-set from the factory with a variety of first ("set") and second ("release") stage pull weights, so you can choose a combination that’s best for your kind of shooting. And you can choose between a traditional Curved trigger shoe or an eye-catching Flat shoe with a different finger-to-trigger feel that some target shooters prefer. As with all CMC triggers, the AR-15 2-stage model has a robust steel housing that retains all the internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is carefully adjusted at the factory for minimal take-up and over-travel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two slightly oversized center pins replace the standard, trigger/hammer pins to prevent trigger wobble, reduce friction, and save wear. Chicago-type screws eliminate pin walk. Single-stage models are also available - see separate listing.

SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Fixed first/second stage pull weights are not user-adjustable. Includes two (2) Chicago-style center pins. Fits AR-15 with .154" diameter trigger and hammer pins. Also works with AR-308s that use AR-15 triggers.

 :  

Complete trigger system installs in five minutes without fitting or modification of parts on the trigger or your receiver. All adjustments are made with setscrews, eliminating the risk of ruining the trigger due to errors in fitting. Includes the JP Speed Hammer for fast lock time, plus “anti-walk” pins with button head cap screws for easy removal and reinstallation of the trigger system. Overtravel adjustment screw lets you set your trigger for a clean, crisp, single-stage release. Comes with two hammer springs: install the yellow spring to get a 3 to 3½ pull for competition or recreational shooting with non-military ammunition. The red spring gives a 3½ to 4 lb. pull and more hammer force for use with the harder primers found on military (5.56mm NATO) ammo and for law enforcement duty use. The red spring should be used in any installation on an AR-style .308 rifle. For a heavier, 4½ lb. pull for tactical applications or NRA Service Rifle competition, install the JPS4.5 spring kit. JPFCP-1EZ fits small pin (.154") receivers.
SPECS: Steel, black oxide finish. Models available for rifles with .154" dia. (military and current commercial rifles) or .169" diameter (Colt rifles) hammer and trigger pin holes. Measure your pins and select the correct kit. NOTE: Will not fit Colt rifles with pinned-in full-auto sear block. JP recommends JPFC-2 trigger for those installations. Kit includes trigger, hammer, disconnector/sear trigger spring, yellow hammer spring, red hammer spring, safety assembly, (2) anti-walk pins, disconnector spring, instructions, and DVD with video showing step-by-step installation.

 :  

Smooth, Even Trigger Pull, Precise Letoff; Easy Installation
Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and is available with pull weight as light as 3.5 lbs. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Machined to exceptionally tight tolerances from hardened steel, and installs in minutes with no permanent alterations to the rifle. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current hammer and pins. Disconnector spring, engagement screw, and overtravel screw are already installed; also includes disconnector, trigger return spring, hammer spring, and .050" hex key. Use with J.P. Enterprises Speed Hammer (available separately) for best performance. Comes with a standard weight hammer spring, for a trigger pull of between 3 and 3.5 lbs.—perfect for competition and recreational shooting—plus a “tactical” spring that gives a 3.5 to 4 lb. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. JPFC-1 fits rifles with standard .154" diameter trigger/hammer pin holes.
SPECS: Steel, Parkerized finish. Models for rifles with either .154" (military and current aftermarket) or .169" (current Colt) diameter trigger pins. Measure your pins and select the correct kit. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation.

 :  

Faster Ignition; Cleaner Pull
Low-mass hammer delivers a 50% shorter lock time than the standard factory hammer for faster ignition and improved accuracy potential. Designed to work with – and enhance the performance of – the JP Enterprises Adjustable Trigger Kit (available separately). Not for use with the standard factory trigger group.
SPECS: A2 tool steel, hardened to Rc 58, Parkerized finish, contact surfaces in-the-white. .7 oz (20g) wt. Separate models for rifles with the .154" (military and current aftermarket) or .169" (current Colt) dia. hammer pins. Measure your pins and select the correct kit.

 :  

The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger andhammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

 :  

The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger andhammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

 :  

The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger andhammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

 :  

Complete, High-Quality Trigger Systems For Unique Operating Environments

G2S TRIGGER – The Geissele 2 Stage (G2S) semi-auto-only trigger drops into your AR-15 to give much of the performance and reliability of Geissele’s proven SSA trigger at an economical price. Features a 4½ lb. total pull weight, non-adjustable sear engagement, and a 2½ lb. first stage. Made of the same tool steel as the SSA with wire-EDM cut engagement surfaces. G2S uses a different method to retain the hammer pin, different pins, and lacks laser marking.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and installation instructions.

 :