Ab einen Bestellwert von 240,- EURO berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND / SHIPPING EXCLUSIVELY TO GERMANY
Parts » Pistolengriffe 1 2 3 42 Artikel

...ja, so war das damals!
 :  
29,00 € (incl. Mwst. zzgl. Versand)
 

Es kann eine Kombination von Basis und Griffschale aus folgenden Farben gewählt werden:
schwarz, blau, silbern, grün, rot, tan, orange
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
Preis für EIN Stück
 :  
119,00 € (incl. Mwst. zzgl. Versand)
 

Es kann eine Kombination von Basis und Griffschale aus folgenden Farben gewählt werden:
schwarz, blau, silbern, grün, rot, tan, orange
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
Preis für EIN Stück
 :  
149,00 € (incl. Mwst. zzgl. Versand)
 

Clever, oder?
 :  
55,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany
 :  
30,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany
Von ca. 2,0mm bis ca. 2,5mm kann man sich selber was wickeln
Lieferung erfolgt wie oben im Bild - die unteren Griffe sind Muster wie es aussehen könnte...
 :  
20,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany
 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany
 :  
27,00 € (incl. Mwst. zzgl. Versand)
 

Made in Germany
 :  
27,00 € (incl. Mwst. zzgl. Versand)
 

fett
Passt nicht bei beidseitigen Sicherungen!!!
 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

passt vom Preis
Passt nicht bei beidseitigen Sicherungen!!!
 :  
29,00 € (incl. Mwst. zzgl. Versand)
 

The Wilson Combat-Bravo Company Starburst Gunfighter Grip is one of the more comfortable and ergonomic grips available for the AR-15. Easy installed with a large flat head screwdriver, this high quality grip has become one of the leaders in the AR-15 market in a very short time. This nearly unbreakable polymer construction has a comfortable, natural grip angle for dynamic shooting and molded Wilson Combat exclusive Starburst design pattern for a sure grip. A water-resistant storage area is perfect for keeping lube or batteries. Reduced angle for improved ergonomics. Hinged trap door offering storage inside the grip with a water-resistant rubber gasket. Made in the USA and manufactured from high quality impact resistant polymers. Mod-3 has rear tang filler for a larger grip to fit gloved and non-gloved users. Exclusive Wilson Combat Starburst pattern for a signature look and improved traction. Note: The tab on the front of the grip must be removed for use with the Wilson Combat® Tactical Trigger Guard (TTG)
 :  
55,00 € (incl. Mwst. zzgl. Versand)
 

Mit Staufach !
Interchangeable Inserts Let You Configure To Fit Your Hand
Mission Adaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core that holds a ½ oz. lubrication bottle in the cap. Additional cores for storing batteries and other items are available separately. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge front strap insert. Reinforced molded polymer construction. NOTE: The TYPE 1 Kit fits all AR15/M4’s as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716. .

 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

Mit Staufach !
Interchangeable Inserts Let You Configure To Fit Your Hand
Mission Adaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core that holds a ½ oz. lubrication bottle in the cap. Additional cores for storing batteries and other items are available separately. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge front strap insert. Reinforced molded polymer construction. NOTE: The TYPE 1 Kit fits all AR15/M4’s as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716. .
Farbe: OD green oder grau oder FDE braun möglich - auf Festbestellung mit Lieferzeit
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen!
Abbildung ähnlich
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

Mit Staufach !
Rubber-Coated Surface Provides Maximum Control In Adverse Environments
Same contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately).

 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

In grau oder Flat Dark Earth oder Foliage Green oder Olive Drab auf Festbestellung mit Lieferzeit
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen!
Abbildung ähnlich
Rubber-Coated Surface Provides Maximum Control In Adverse Environments
Same contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately).

SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, and Foliage Green. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.
 :  
37,00 € (incl. Mwst. zzgl. Versand)
 

Slimmed-down version of the original MOE grip for shooters with smaller hands or those who simply prefer a slimmer grip profile. Fits most AR-15/M16 type rifles, including AR-style .308s that use a standard AR-15 pistol grip. Narrower and shorter front to back than the original MOE or the standard A2 grip, the MOE-K is designed specifically for personal defense weapons and their operators by adding more vertical grip angle that brings the primary hand closer to the shooter’s body, thus improving control and retention.
SPECS: Reinforced molded polymer, Black, Flat Dark Earth, O.D. Green, Dark Earth or Gray. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.
 :  
30,00 € (incl. Mwst. zzgl. Versand)
 

Farben: Flat Dark Earth oder GRAU oder Olive Drab auf Festbestellung mit Lieferzeit
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen!
Abbildung ähnlich
 :  
33,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Pistolengriffe 1 2 3 42 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)