Ab einen Bestellwert von 240,- EURO berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND / SHIPPING EXCLUSIVELY TO GERMANY
Parts » Magazinknopf 1 2 33 Artikel

Lets You Drop The Mag Just As Easily With Either Hand
Knight’s ambidextrous mag release offers a large, easy-to-find off-side release lever that helps you drop the mag reliably and consistently from an unorthodox hand position. The long, wide off-side lever has clean, deep serrations on the control pad, plus the correct angle to provide the right leverage to easily drop the mag - but only when you want to. Easy, drop-in installation on any standard mil-spec AR-15 lower receiver, and requires zero permanent modifications to your rifle. Any time you need to switch back to the original factory button, the KAC unit can be swapped out almost instantly.
 :  
109,00 € (incl. Mwst. zzgl. Versand)
 

Für Linkshänder !
 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

Optimal für Linshänder
Made in Germany!
 :  
89,00 € (incl. Mwst. zzgl. Versand)
 

Optimal für Linshänder
Made in Germany!
 :  
69,00 € (incl. Mwst. zzgl. Versand)
 

Optimal für Linshänder
Made in Germany!
 :  
95,00 € (incl. Mwst. zzgl. Versand)
 

Optimal für Linshänder
 :  
59,00 € (incl. Mwst. zzgl. Versand)
 

The Strike Industries AR Modular Magazine Release (MMR) offers a quick and simple way to configure your mag button preference to one of three (3) included options. No need to remove the mag catch if you want to change the button. A simple push of the magazine button adapter using an object that fits in the space allows for a quick and simple swap of the magazine button. The SI MMR comes with included Standard, Extended and Oversized buttons so you always have the modularity to swap at home or at the range. The mag buttons are textured for positive feel and manipulation of your AR for enhanced ergonomic control. The provided mag buttons are made from lightweight polymer paired with SUS630 stainless steel shaft sleeve and mag button adapter. Included as well is a steel magazine catch along with a magazine spring to give you everything out of the package for a drop-in installation. The Strike Industries AR Modular Magazine Release gives you the ability meet various setups to your personal liking or specific mission in this complete assembly. Modular design for quick and simple magazine button replacement Swap out the magazine button with the magazine catch still installed Choose from Standard, Extended or Oversized included buttons Textured for positive feel and manipulation Magazine buttons made from durable and lightweight polymer SUS630 stainless steel shaft sleeve and button adapter Steel magazine catch Drop-in installation
 :  
59,00 € (incl. Mwst. zzgl. Versand)
 

The concave V-Groove button face offers excellent ergonomic feel and self-centers the index finger as pressure is applied. The horizontal, parallel serrations helps slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction. The BAD-EMR also features a lightweight skeletonize back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approxmiately 0.002 lbs). BAD-EMR is compatible with all lower receivers that accepts mil-spec magazine release buttons.
 :  
29,00 € (incl. Mwst. zzgl. Versand)
 

sehr schick
Gives Ultra-Positive Thumb Engagement & Enhanced Appearance
Machined aluminum magazine release button has a proprietary “Diamond Texture” surface for secure thumb contact and easy "one-hit" mag drops. Also adds a distinctive visual touch to your rifle. Drops into any mil-spec lower receiver to replace the factory magazine release button.
 :  
15,00 € (incl. Mwst. zzgl. Versand)
 

Easy Install, No Gunsmithing Required
The Enhanced AR Magazine Release from Magpul offers easy install without a gunsmith. The Magpul AR Enhanced Magazine Release provides a larger contact surface for ease and speed when changing out your magazine. Machined from mil-spec anodized aluminum Two-piece construction for easy installation and reduced profile Provides larger contact surface for positive activation The Enhanced AR Magazine Release from Magpul is compatible with most 5.56 and 7.62 pattern receivers.
 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

A Magazine Release Upgrade That Increases Surface Area By 263 Percent!
While you’re upgrading control components on your AR-15, you might as well go big or go home. Literally. This Armaspec AR-15 TCB-31 Tactical Combat Button takes the concept of a mag release and turns it up to 11. Or, more specifically, turns it up to 263. This enhanced mag release provides an incredible 263-percent more activation area, so you can be confident in getting positive engagement on your mag release from any position. Each Armaspec TCB magazine release features an ergonomic design that facilitates easy activation, and the whole of the design is oriented to ensure shooters can activate the release without shifting from a firing grip. The release button fits all 5.56/.223 and 7.62/.308 AR receivers, and the release is machined right here in the USA.
 :  
33,00 € (incl. Mwst. zzgl. Versand)
 

Faster Mag Changes
The Phase 5 AR-15/308 Oversized Magazine Release is a drop-in two-piece assembly which replaces the standard mil-spec magazine release button. With easy installation that requires absolutely no gunsmithing, the Phase 5 AR-15/308 Oversized Magazine Release is a breeze to install, Larger contact surface than the standard magazine release button Ergonomic pocket on surface paddle for your finger Materials: 6061-T6 billet aluminum Compatible with Extended Bolt Releases The Phase 5 AR-15/308 Oversized Magazine Release will make mag drops faster and easier.
 :  
39,00 € (incl. Mwst. zzgl. Versand)
 

The Phase 5™ PMR-Dimpled is a CNC machined 6061-T6 billet aluminum magazine release button. Easy to install, the PMR is a drop in component that replaces the Mil-Spec magazine release button. Including a dimpled design on the button face, the PMR adds style and keeps the function of a Mil-Spec button. Fits AR 5.56/.223 and 7.62/.308 receivers. FINISH: This product has a anodized finish.
 :  
19,00 € (incl. Mwst. zzgl. Versand)
 

The concave V-Groove button face offers excellent ergonomic feel and self-centers the index finger as pressure is applied. The horizontal, parallel serrations helps slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction. The BAD-EMR also features a lightweight skeletonize back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approxmiately 0.002 lbs). BAD-EMR is compatible with all lower receivers that accepts mil-spec magazine release buttons.
 :  
17,00 € (incl. Mwst. zzgl. Versand)
 

1A Qualität
Muss bei DAR & HERA angepasst werden da zu groß
 :  
29,00 € (incl. Mwst. zzgl. Versand)
 

Precision CNC Machined for billet 7075-T6 Aluminum in an anodized black, clear, or red finish, the BAD-EMMR features an unique, patent pending three sided dovetail finger pad attachment mechanism that allows for maximum strength, an almost uninterrupted finger pad face for maximum design aesthetics, light weight and low profile design. The interchangeable finger pads offers excellent ergonomic feel and ease of operation without shifting grip position. If you are looking for maximum flexibility, robust design and unparalleled design aesthetics, the BAD-EMMR is the ultimate extended magazine release for you.
 :  
44,00 € (incl. Mwst. zzgl. Versand)
 

Precision CNC Machined for billet 7075-T6 Aluminum in an anodized black, clear, or red finish, the BAD-EMMR features an unique, patent pending three sided dovetail finger pad attachment mechanism that allows for maximum strength, an almost uninterrupted finger pad face for maximum design aesthetics, light weight and low profile design. The interchangeable finger pads offers excellent ergonomic feel and ease of operation without shifting grip position. If you are looking for maximum flexibility, robust design and unparalleled design aesthetics, the BAD-EMMR is the ultimate extended magazine release for you.
.
 :  
42,00 € (incl. Mwst. zzgl. Versand)
 

Precision CNC Machined for billet 7075-T6 Aluminum in an anodized black, clear, or red finish, the BAD-EMMR features an unique, patent pending three sided dovetail finger pad attachment mechanism that allows for maximum strength, an almost uninterrupted finger pad face for maximum design aesthetics, light weight and low profile design. The interchangeable finger pads offers excellent ergonomic feel and ease of operation without shifting grip position. If you are looking for maximum flexibility, robust design and unparalleled design aesthetics, the BAD-EMMR is the ultimate extended magazine release for you.
 :  
42,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Magazinknopf 1 2 33 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)