Ab einen Bestellwert von 240,- EURO berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND / SHIPPING EXCLUSIVELY TO GERMANY
Parts » Kompensator 1 2 3 4 62 Artikel

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
 :  
145,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich
 :  
145,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich
 :  
145,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
 :  
145,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich
 :  
145,00 € (incl. Mwst. zzgl. Versand)
 

VDI Jet Comps are designed to maintain target acquisition while engaging target in a dynamic scenario. This design reduces felt recoil and muzzle rise by the direction of the vented gas. This jet comp is treated with a proprietary LifeCoat process for durability and corrosive resistance. Includes a crush washer.
SPECS: Threads: 1/2x28, Weight: 3.58oz.
Restposten
 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

Restposten
 :  
77,00 € (incl. Mwst. zzgl. Versand)
 

Provides Enhanced Control over Your Pistol-Caliber Carbine
Pistol-caliber carbines are popular options in today’s firearm world, offering new options for inexpensive and low-recoil range training and close-quarters personal defense. Now, the VG6 Gamma 9mm Muzzle Brake makes recoil virtually non-existent. Machined from 17-4ph stainless steel, the VG6 Gamma 9mm Muzzle Brake is designed to attach to AR-15-style pistol-caliber carbines. The design of the brake incorporates a number of ports that are specifically designed for the gas outflow created by 9mm ammunition. This leads to a softer shooting experience and allows users to stay on-target during recoil for fast follow-up shots. Fits all 1/2-28 TPI threaded muzzles Weight: 2.1 ounces Surface hardness: 68RC Crush washer included for install
 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

Provides Revolutionary Muzzle Control
The VG6 Precision Delta 556 muzzle brake offers AR-15 shooters an unprecedented level of control, ensuring they can keep their rifle muzzles level and on-target while simultaneously damping felt recoil. The VG6 Precision Delta 556 AR-15 muzzle brake is an optimized design that was developed through the use of computational fluid dynamics and computer-aided engineering. It is a hybrid compensator and muzzle brake that smooths out the recoil impulse AND reduces muzzle rise. The result is a more comfortable shooting experience, while it helps the shooter keep the sights on the target for faster, more accurate follow-up shots than with the standard A2 flash hider. Machined 17-4 PH stainless steel Available with gray-silver BBSS (bead-blasted stainless steel) finish OR with a hard Blacknitride™ finish Fits muzzles with 1/2"-28 tpi threads Crush washer included The VG6 Precision Delta 556 muzzle brake is designed for optimum performance on AR-15 barrels with 10.5" to 18.5" lengths.
 :  
77,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
 :  
165,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
Compact brake is designed to direct both blast and noise forward, away from the shooter, to effectively dampen recoil for better control. Brake gives an extremely low dust signature and features a recessed crown with a raised saw tooth rim that allows secondary use as a breeching device. Humorously inscribed with “Point Toward Enemy” and large arrow. Models available to fit rifles chambered in 5.56/.223.
 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

Stahl
At just 1¾" long, this high-performance muzzle brake adds minimal bulk to the muzzle. Left and right side ports vent gasses evenly to reduce felt recoil and muzzle rise – enabling quicker, more accurate follow-up shots. Underside is solid to eliminate dust printing when shooting from the prone position.
Restposten
 :  
166,00 € (incl. Mwst. zzgl. Versand)
 

Fett - geht bis 8mm
 :  
229,00 € (incl. Mwst. zzgl. Versand)
 

7,62 in M14, M15, M18
oder
9,3 in M14, M15, M18, 5/8x24
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen
 :  
110,00 € (incl. Mwst. zzgl. Versand)
 

brüniert
Made in Germany!
 :  
46,00 € (incl. Mwst. zzgl. Versand)
 

brüniert
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

Ensures Correct Alignment For Flash Hiders & Muzzle Brakes
Hardened steel shims ensure precise fit and correct alignment of flash suppressors, muzzle brakes, and compensators. Large (thick) shim allows 90° of rotation and can be used as a spacer for barrels not having a relief cut behind the threads. Medium shims add approximately 45° of rotation. Small shims used with large and medium shims provide smaller degrees of rotation for finely-tuned, critical alignment.
SPECS: Steel. Sold in 10 paks (1 small, 1 large, 8 medium). .223 - .748" O.D. Fits muzzles threaded ½"-28 tpi.




 :  
13,00 € (incl. Mwst. zzgl. Versand)
 

Ensures Correct Alignment For Flash Hiders & Muzzle Brakes
Hardened steel shims ensure precise fit and correct alignment of flash suppressors, muzzle brakes, and compensators. Large (thick) shim allows 90° of rotation and can be used as a spacer for barrels not having a relief cut behind the threads. Medium shims add approximately 45° of rotation. Small shims used with large and medium shims provide smaller degrees of rotation for finely-tuned, critical alignment.
SPECS: Steel. Sold in 10 paks (1 small, 1 large, 8 medium). .223 - .748" O.D. Fits muzzles threaded ½"-28 tpi.





 :  
15,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Kompensator 1 2 3 4 62 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)