Ab einen Bestellwert von 240,- EURO berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND / SHIPPING EXCLUSIVELY TO GERMANY
Parts » Buffer 1 2 24 Artikel

noch was was Sinn macht!
 :  
17,00 € (incl. Mwst. zzgl. Versand)
 

Endlich mal ne geile Sache und Made in Germany!
Ergibt ein schöneres Schießverhalten der Waffe bei schnellen Doubletten
Passt nicht bei 9mm Waffen!!!!
Made in Germany!
 :  
199,00 € (incl. Mwst. zzgl. Versand)
 

NORD ARMS
Advanced buffer system
Ther Advanced Buffer System is designed to replace regular factory 82.5 mm / 3.25" buffers. It absorbs felt recoil considerably better than regular buffers, keeping your rifle more steady and allowing for quicker follow-up shots. Made of strong titanium and aluminium parts to keep the weight down and Long Life springs and durable rubber to maximize life cycle. The system comes with three springs with different weight to be used with different bolt carriers and magazines (heavier bolt carriers and using magazines with stronger springs need stronger buffer spring).
Specifications:
length when fully extended: 18 cm / 7.1"
length when fully collapsed: 8 cm / 3.2"
weight: 128 grams / 4.5 oz
Passt nicht bei 9mm Waffen!!!!
 :  
99,00 € (incl. Mwst. zzgl. Versand)
 

The Gen 2 Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. The Auxiliary Spring Rate Kits for the JP Silent Captured Spring allow custom tuning of the device to a given rifle. While the default spring offers the best performance for the widest range of configurations, a simple disassembly and reassembly of the JPSCS with a slightly different spring rate can yield truly optimized performance, particularly for rifles without an adjustable gas block. Benefits of the Gen 2 Captured Silent Springs include: New aluminum guide rod cuts overall weight Heavier masses translate to more buffering mass and chance of bolt bounce Full correspondence between SCS masses and H1, H2 and H3 buffers Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa) Includes spacer to allow for installation in both carbine-length and rifle-length buffer tubes. The standard weight buffer weighs approximately 3.6 ounces. The buffer contains one Tungsten weight, and two steel weights.
Passt nicht bei 9mm Waffen!!!!
 :  
270,00 € (incl. Mwst. zzgl. Versand)
 

The Gen 2 Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. The Auxiliary Spring Rate Kits for the JP Silent Captured Spring allow custom tuning of the device to a given rifle. While the default spring offers the best performance for the widest range of configurations, a simple disassembly and reassembly of the JPSCS with a slightly different spring rate can yield truly optimized performance, particularly for rifles without an adjustable gas block. Benefits of the Gen 2 Captured Silent Springs include: New aluminum guide rod cuts overall weight Heavier masses translate to more buffering mass and chance of bolt bounce Full correspondence between SCS masses and H1, H2 and H3 buffers Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa) Includes spacer to allow for installation in both carbine-length and rifle-length buffer tubes. The standard weight buffer weighs approximately 3.6 ounces. The buffer contains one Tungsten weight, and two steel weights.
Passt nicht bei 9mm Waffen!!!!
 :  
320,00 € (incl. Mwst. zzgl. Versand)
 

Produktinformationen "DPM RECOIL BUFFER ASSEMBLY FOR AR-15 PLATFORM WITH USER ADJUSTABILITY"
DPM RECOIL BUFFER ASSEMBLY FOR AR-15 PLATFORM WITH USER ADJUSTABILITY

Overall Advantages
Full User Adjustability
Bolt and Frame Protection
Significant Recoil Reduction
Elimination of Jams
Faster Follow Up Shots
Better Double-Tap Concentration
Better Control and Greater Accuracy
Correct Locking Bolt
 :  
225,00 € (incl. Mwst. zzgl. Versand)
 

extrem schwer ...
ca. 190gr.
Made in Germany!
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

sehr schwer
ca. 165gr.
 :  
69,00 € (incl. Mwst. zzgl. Versand)
 

schwer
ca. 145gr.
 :  
59,00 € (incl. Mwst. zzgl. Versand)
 

Normal aber in bessere Qualität
schwerer
ca. 112gr.
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

0 8 15
ca. 86gr.
 :  
42,00 € (incl. Mwst. zzgl. Versand)
 

Den schieße ich auch !
ca. 50gr.
kommt in silbern...
 :  
48,00 € (incl. Mwst. zzgl. Versand)
 

A Meticulously Machined Trigger Guard for Your Enhanced AR-15
Thanks to the miracles of modern machining, Geissele tackled the unassuming AR-15 trigger guard with renewed vigor, creating a masterpiece that’s head-and-shoulders above any other AR-15 trigger guard on the market. Thanks to the use of 5-Axis machining, the Geissele Ultra Precision Trigger Guard features meticulous machining that removes every sliver of unneeded metal in its construction. Machined from 7075-T6 aluminum, the Geissele Ultra Precision Trigger Guard provides users with a smooth, snag-free surface from virtually every point on the guard. The design is so precise, that the company was even able to fill in that irritating gap between the trigger guard and the pistol grip. Plus, it just looks awesome, too, making it the perfect finishing touch for your dream-gun build. You can get the guard in either black or DDC finishes.
 :  
37,00 € (incl. Mwst. zzgl. Versand)
 

The Strike Industries AR Mil-Spec Buffer Housing gives the user a cost-effective means of customization while retaining functionality. The AR-15 buffer is often an overlooked part of the gas system that is needed to properly fine-tune your specific setup. This buffer housing is machined from 6061-T6 aluminum and designed to fit Mil-Spec standard or carbine length receiver extensions/buffer tubes while also providing a level of customization. The SI AR Mil-Spec Buffer Housing is shipped without weights so that you can either replace your current housing, use existing weights or opt to purchase weights to refine the weapons gas system to your specific needs. The NBR rubber material buffer pad helps absorb impact and is secured by the included roll pin. By modulating the weight through the combination of tungsten, steel and aluminum weights, the user is given a cost-effective means of adjusting the weapons reciprocating mass, and thus the recoil experienced by the shooter with the Strike Industries AR Mil-Spec Buffer Housing. COMPATIBILITY: 14mm (0.55"") diameter Mil-Spec buffer weights and spacers (maximum of 14.20mm) Mil-Spec standard and carbine length receiver extensions/buffers NOTE: Buffer housing only, no weights or spacers included- Do NOT use without installing weights Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary
 :  
37,00 € (incl. Mwst. zzgl. Versand)
 

A Do-It-All Adjustable Carbine Buffer for All your Ares
In an effort to provide the most customization possible for today’s AR builders, launched its Adjustable Buffer, which can be used in AR 308, AR-15s and 9mm pistol-caliber carbines with ease. Each adjustable buffer ships with multiple weights that can be swapped out to fine-tune performance in your gun, ensuring that you can have a rifle that runs right with any kind of ammunition.
 :  
36,00 € (incl. Mwst. zzgl. Versand)
 

Coole Sache
Made in Germany!
 :  
22,00 € (incl. Mwst. zzgl. Versand)
 

 :  
9,00 € (incl. Mwst. zzgl. Versand)
 

Kommt in die Rifle Buffer Tube um Carbine weiter zu schießen
 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Buffer 1 2 24 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)