Ab einen Bestellwert von 240,- &eur; berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
VERSAND AUSSCHLIESSLICH NACH DEUTSCHLAND
SHIPPING EXCLUSIVELY TO GERMANY
Parts » Ersatzteilset´s   18 Artikel

DAR Roll Pin Kit beinhaltet folgende Artikel:
•Bolt Catch Roll Pin
•Charing Handle Roll Pin
•Ejector Roll Pin
•Forward Assist Roll Pin
•Gasblock Roll Pin
•Trigger Guard Roll Pin
Made in Germany!
 :  
8,00 € (incl. Mwst. zzgl. Versand)
 

Das DAR Pin Kit beinhaltet folgende Artikel:
•Barrel Extension Pin
•Bolt Catch Buffer
•Buffer Retainer
•Detent Pin 2x
•Ejection Port Cover Pin
•Extractor Pin
•Selector Detent Pin
•Trigger Hammer Pin 2x
Made in Germany!
 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

Das DAR Spring Kit beinhaltet folgende Artikel:
•Bolt Catch Spring
•Buffer Retainer Spring
•Charging Handle Latch Spring
•Detent Spring 2x
•Ejection Port Cover Spring
•Ejector Spring
•Extractor Spring
•Forward Assist Spring
•Magazin Catch Spring
•Selector Spring
Made in Germany!
 :  
19,00 € (incl. Mwst. zzgl. Versand)
 

So wie abgebildet
This 5.56 NATO AR-15 lower receiver parts kit is made of all high quality, Made in the USA, Mil-spec parts. This kit does not contain a fire control group or pistol grip. Each part is well made, durable and packaged in color coded bags for easy installation. This kit is an excellent choice for building or rebuilding an AR-15 rifle. Contains: Takedown Pin, Receiver Pivot Pin, Takedown Pin Detent (2), Takedown Pin Detent Spring (2), Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring Pin, Bolt Catch Spring, Buffer Retainer, Buffer Retainer Spring, Magazine Catch, Magazine Catch Spring, Magazine Catch Button, Trigger Guard Assembly, Trigger Guard Pivot Spring Pin, Safety Selector, Selector Detent, Selector Detent Spring, Grip Screw Washer, Grip Screw.
SPECS: Fits standard 5.56 NATO AR-15 lower receivers, Mil-Spec.
NO Trigger an Grip!
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

Replacement Pins, Springs & Rings Keep Your AR Shooting
Genuine, Mil-spec quality small pins, springs, washers and screws for the AR-15/M-16 that wear out, break, or just get lost. With this economical kit on hand you’ll always have the part you need.
SPECS: Kit contains A-1 Sight Drum Pin,A-2 Windage Knob pin, bolt catch pin, bolt catch spring, bolt gas rings, buffer retainer spring, CAR buffer spring STD buffer spring, ejection port cover spring, ejector retainer pin, firing pin retainer pin. Flash suppressor lock washer, forward assist pin, forward assist spring, sling swivel rivet, front sight detent spring, gas tube pin, hammer spring, mag catch spring, pivot pin spring, takedown pin spring, snap ring, trigger spring, trigger guard pin, pistol grip star washer & pistol grip screw.
 :  
35,00 € (incl. Mwst. zzgl. Versand)
 

Replacement military-style Trigger Group for receivers with a .154 diameter small pin. Contains a trigger, hammer, disconnector and selector.




 :  
85,00 € (incl. Mwst. zzgl. Versand)
 

Schlabo
Schlabo Feder
Schlabo Pin
Auzieher
Auszieher Bolzen
The CMMG Mk9 9mm Bolt Rehab Kit contains all the parts necessary to repair or maintain your CMMG 9mm bolt. Kit contains the following parts: Mk9 firing pin, Mk9 firing pin spring, Mk9 extractor, Mk9 extractor roll pin and firing pin retaining pin.
 :  
75,00 € (incl. Mwst. zzgl. Versand)
 

All The Parts To Refurbish Or Repair Your Bolt
Caliber-specific kits contain all the parts needed to refurbish or repair bolts on AR-style rifles. AR-15 Kit contains ejector, ejector/selector detent spring, extractor, extractor spring and buffer, extractor pin, ejector roll pin, 3 gas rings and extractor spring o-ring. 308 Kit fits CMMG, DPMS and similar-pattern AR-Style 308 rifles. It contains firing pin, firing pin retaining pin, extractor, extractor pin, large and small extractor springs, extractor o ring, ejector, ejector spring, and 2 McFarland-style bolt rings. 9mm Kit contains firing pin, firing pin spring, firing pin retaining pin, extractor and extractor roll pin. 22 LR Kit contains firing pin, extractor pin, 22 extractor, 22 extractor spring, 22 firing pin, 22 guide tube pin and firing pin spring. All kits sold separately.
SPECS: Fits - AR15 & M16 bolts.
 :  
59,00 € (incl. Mwst. zzgl. Versand)
 

Repair & Maintain Your .22LR AR-15/M16
Keep your CMMG or similar AR-15/M16 .22LR functioning properly with this bolt rehab kit. Kit contains: firing pin, firing pin retaining pin, extractor pin, .22 extractor, and extractor roll pin.
SPECS: Steel, all parts. Fits CMMG and similar 22lr bolts and conversion unites.
Abbildung ähnlich
 :  
44,00 € (incl. Mwst. zzgl. Versand)
 

Stable Performance For 500,000 Compression Cycles
Replacement, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds.
SPECS: Chrome silicon steel.
 :  
19,00 € (incl. Mwst. zzgl. Versand)
 

•Bolt Gas Rings
•Extractor
•Extractor Spring Insert
•Extractor Spring
•Extractor Pin
•Ejector Roll Pin
•Ejector Spring
•Ejector
 :  
48,00 € (incl. Mwst. zzgl. Versand)
 

•Pivot
•Take Down
•Hammer and Trigger
•Bolt Catch Roll
•Forward Assist
•Trigger Guard Roll
•Gas Tube Roll
•Ejector
•Extractor
•Firing Pin Retaining
•A2 Sight Roll
•Selector Detent
 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

•UR-31 Rear Base Elevation Knob Spring
•UR-05 Ejection Port Cover Spring
•LR-32 Hammer Spring
•UR-07 Forward Assist Spring
•LR-22 Trigger Spring
•LR-16 Magazine Catch Spring
•FS-04 Front Sight Spring
•LR-26 Selector Spring
•LR-31 Disconnector Spring
•LR-09 Bolt Catch Spring
•BT-08 Extractor Spring Assembly
•LR-14 Detent Spring
 :  
17,00 € (incl. Mwst. zzgl. Versand)
 

zum perfekten einstellen vom Abzug...
 :  
21,00 € (incl. Mwst. zzgl. Versand)
 

For Smooth, Light Trigger Pull & Reliable Ignition
Precision-calibrated springs give produce a consistent pull on a stock JP M15 rifle trigger, while preserving ignition reliability with U.S.-manufactured ammunition. JPS3.5T produces 3.5 to 4 lb. trigger pull. Can also be used with properly prepared (instructions included) mil-spec trigger/hammer components to produce a 4- to 5-lb. pull with a smooth “roll off” feel and good control. The JPS4.0 spring kit produces a 4 to 4.5 lb. trigger pull.
SPECS: Spring steel. Kit includes red-coded hammer spring, yellow-coded trigger return spring, and disconnector spring. For use on AR-style .308 rifles; not for defense or duty applications




 :  
20,00 € (incl. Mwst. zzgl. Versand)
 

For Smooth, Light Trigger Pull & Reliable Ignition
Precision-calibrated springs give produce a consistent pull on a stock JP M15 rifle trigger, while preserving ignition reliability with U.S.-manufactured ammunition. JPS3.5T produces 3.5 to 4 lb. trigger pull. Can also be used with properly prepared (instructions included) mil-spec trigger/hammer components to produce a 4- to 5-lb. pull with a smooth “roll off” feel and good control. The JPS4.0 spring kit produces a 4 to 4.5 lb. trigger pull.
SPECS: Spring steel. Kit includes red-coded hammer spring, yellow-coded trigger return spring, and disconnector spring. For use on AR-style .308 rifles; not for defense or duty applications




 :  
19,00 € (incl. Mwst. zzgl. Versand)
 

Unterbrecherfeder
Abzugsfeder
Contains one reduced power trigger spring and one disconnector spring Designed to lighten and improve trigger function For use in AR15, M16, M4, & variants
 :  
9,00 € (incl. Mwst. zzgl. Versand)
 

The Aero Precision upper parts kit includes the parts you need to assemble your AR15 Upper Receiver. Includes: Forward Assist Assembly Forward Assist Spring Forward Assist Roll Pin Ejection Port Cover Door Ejection Port Cover Rod with c-clip Ejection Port Cover Spring
 :  
32,00 € (incl. Mwst. zzgl. Versand)
 

Parts » Ersatzteilset´s   18 Artikel
Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!! Fragen? WhatsApp: 017672551153 (schreiben)