The Raptor™ ambidextrous charging handle by Radian Weapons (formerly AXTS) is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec anodized.
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!

 :  

passt überall wenn kein Piston System verbaut ist!
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!
Made in Germany!

 :  

passt überall wenn kein Piston System verbaut ist!
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!
Made in Germany!

 :  

passt überall wenn kein Piston System verbaut ist!
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!
Aero Precision’s Charging Handles are tried and true! They offer both a standard AR-15 Charging handle with a black finish, as well as their Ambidextrous Charging Handle! The Aero Precision AR15 Ambidextrous Charging Handle features a profound design with left and right-side activation levers to charge your firearm from either hand. This rugged handle is made in the USA from 7075-T6 aluminum, anodized black with our laser etched Aero Precision logo. Caliber - 5.56 7075-T6 aluminum Made in the USA

 :  

Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!

 :  

Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!

 :  

Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!

 :  

Tactical/Competition Handle With Oversized, No-Slip Latch
Rugged aluminum charging handle features an oversized latch with aggressive serrations to provide an ultra- secure gripping surface when charging the weapon or clearing malfunctions. High-profile Tac Latch is machined from 7075 T6 aluminum to exact tolerances and with Mil S-8625 Type III Class 2 hardcoat anodized with a Teflon surface coating for superior performance and trouble-free operation. Tac Latch is available separately for fitting to standard charging handles to improve handling.
SPECS: 7075 T6 aluminum, Type III hardcoat anodized, Teflon coated, matte black. Latch pad approximately 1” (2.5cm) wide, ½” (1.3cm) high.
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!
Restposten

 :  

komplett
Dieser Charging Handle passt ausschließlich bei Waffen mit Stoner Gassystem (wie M16) - NICHT bei Piston Systemen (wie bei HK oder Haenel)!!!

 :  

100% Made in Lichtentanne/Sachsen

 :  

1A Qualität

 :  

For Fast, Efficient Charging Handle Operation With Either Hand
Heavy-duty latch enables fast, efficient, unimpeded operation of the charging handle with either hand, even when wearing gloves. Extended, off-side design with gently rounded tips won’t interfere with sling or catch on other equipment. Installs in place of your rifle’s existing charging handle latch using existing spring and detent.
Machined 6061 T6 aluminum, hardcoat anodized, matte black. 2½" (6.3cm) long. Includes replacement pivot roll pin.

 :  

 :  

Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).

 :  

Die unauffällige Ausführung !

 :  

Die einfache Ausführung !

 :  

Oversized, No-Slip Latch

Oversized latch with aggressive serrations to provide an ultra- secure gripping surface when charging the weapon or clearing malfunctions. High-profile Tac Latch is machined from 7075 T6 aluminum to exact tolerances and with Mil S-8625 Type III Class 2 hardcoat anodized with a Teflon surface coating for superior performance and trouble-free operation. Fits standard charging handles to improve handling.

SPECS: 7075 T6 aluminum, Type III hardcoat anodized, Teflon coated, matte black. Latch pad approximately 1” (2.5cm) wide, ½” (1.3cm) high.

 :  

Helps You Cycle the Handle Fast, On the FIRST Try
Precision Reflex’s replacement AR-15 charging handle latches have oversized grasping surfaces to help you operate the handle faster and more reliably, especially when you’re under stress. They fit standard mil-spec charging handles as well as PRI Gas Buster handles and are machined from hardened steel to stand up to hard use. Precision Reflex replacement AR-15 Charging Handle Latches come in three configurations: Flat Latch most resembles the latch on the standard mil-spec handle, but has a deeply hooked contour that gives you an extra-secure, non-slip hold Military Big Latch is oversized with a straight front edge that is easy to locate, grasp, and operate; edges are rounded to protect your fingers Combat Latch has a similar contour to Military Big Latch but is 17% larger, with serrations on the front edge to assist in quick and comfortable operation All PRI replacement AR-15 charging handle latches will help you get your finger in the right place and cycle the handle FAST on the first attempt, without fumbling and false tries. Roll pin included.

SPECS: Aluminum, hardcoat anodized, matte black

 :