The Primary Weapon Systems PRC compensator, originally introduced for .30 only, was designed to reduce felt recoil as much as possible. Now in a .22 caliber option this compensator is very effective in reducing felt recoil, while being California compliant. The PRC design produces a low ground signature and overpressure to the shooter. It also gives ultimate control for seeing impacts through your optic and stabilizes follow up shots. Caliber: .223/5.56 Thread Pitch: 1/2x28 Length: 2.4" Diameter: .863" Weight: 2.9 oz.

 :  

Gewicht ca. 64 gr.
Andere Gewinde sind möglich - bitte anfragen
Mit Aufnahmemöglichkeit für Dämpfer oder Rotex System

 :  

fast schon ein Komp
Mit Aufnahmemöglichkeit für Dämpfer oder Rotex System

 :  

FAB Star - Shaft 5.56
Gewicht ca.100 gr.
Sonderposten

 :  

Stahl

 :  

Stahl

 :  

Stahl

 :  

Stahl

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.

 :  

Stahl
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.

SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5/16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.
Abbildung ähnlich

 :  

VDI Jet Comps are designed to maintain target acquisition while engaging target in a dynamic scenario. This design reduces felt recoil and muzzle rise by the direction of the vented gas. This jet comp is treated with a proprietary LifeCoat process for durability and corrosive resistance. Includes a crush washer.
SPECS: Threads: 1/2x28, Weight: 3.58oz.
Restposten

 :  

Restposten

 :  

Provides Enhanced Control over Your Pistol-Caliber Carbine
Pistol-caliber carbines are popular options in today’s firearm world, offering new options for inexpensive and low-recoil range training and close-quarters personal defense. Now, the VG6 Gamma 9mm Muzzle Brake makes recoil virtually non-existent. Machined from 17-4ph stainless steel, the VG6 Gamma 9mm Muzzle Brake is designed to attach to AR-15-style pistol-caliber carbines. The design of the brake incorporates a number of ports that are specifically designed for the gas outflow created by 9mm ammunition. This leads to a softer shooting experience and allows users to stay on-target during recoil for fast follow-up shots. Fits all 1/2-28 TPI threaded muzzles Weight: 2.1 ounces Surface hardness: 68RC Crush washer included for install

 :  

Stahl

 :